Electric
Brand: TORK CRAFT
MPN: MY3015-2-SK04
Tork Craft Polisher Service Kit Aux Handle (50) For MY3015-2
At a Glance; Genuine side handle replacement for MY3015-2 polisher
The Tork Craft Polisher Service Kit Aux Handle (50) For MY3015-2 is a genuine replacement side handle that brings
your polisher back to full, two-handed control. If the original handle has gone missing, cracked or worn, this
MY3015-2-SK04 kit lets you fit a new auxiliary handle so you can guide the machine more safely and comfortably while
pol..
N$ 108.10
Ex VAT:N$ 94.00
Brand: TORK CRAFT
MPN: MY3015-2-SK05
Tork Craft Bearing And Retainer (26/27) For MY3015-2
At a Glance; Genuine bearing and retainer kit for MY3015-2 polisher
The Tork Craft Bearing And Retainer (26/27) For MY3015-2 is a genuine replacement kit designed to keep your
polisher or burnishing machine running smoothly. Bearings work hard under load and can eventually wear out, leading
to extra noise, vibration and reduced performance. This MY3015-2-SK05 kit replaces the bearing and its matching
retainer (identi..
N$ 1,002.69
Ex VAT:N$ 871.90
Brand: TORK CRAFT
MPN: MY3015-2-SK06
Tork Craft Polisher Service Kit Armature (28) For MY3015-2
At a Glance; Genuine replacement armature for MY3015-2 polisher
The Tork Craft Polisher Service Kit Armature (28) For MY3015-2 is the genuine replacement motor armature for your
MY3015-2 polisher or burnishing machine. Hard work, dust and overload can eventually damage the original armature,
leading to loss of power, excessive sparking or a motor that will not run at all. Swapping in the correct
MY3015-2-SK06 a..
N$ 647.05
Ex VAT:N$ 562.65
Brand: TORK CRAFT
MPN: MY3015-2-SK07
Tork Craft Polisher Service Kit Armature Rear Bearing And Shield (29–32) For MY3015-2
At a Glance; Genuine rear bearing and shield kit for MY3015-2 armature
The Tork Craft Polisher Service Kit Armature Rear Bearing And Shield (29–32) For MY3015-2 is designed to keep the
motor running smoothly where it matters most – at the rear of the armature. As bearings wear, you will often feel
extra vibration, hear more noise and notice the tool working harder than it should. This serv..
N$ 280.66
Ex VAT:N$ 244.05
Brand: TORK CRAFT
MPN: MY3015-2-SK08
Tork Craft Polisher Service Kit Stator (33/34) For MY3015-2
At a Glance; Genuine stator assembly for MY3015-2 burnishing machine
The Tork Craft Polisher Service Kit Stator (33/34) For MY3015-2 is a factory-approved replacement stator for the
MY3015-2 stainless burnishing machine. Heavy use, dust and overload can overheat or damage the original stator
windings, leading to poor performance or a motor that will not start. Fitting the correct MY3015-2-SK08 stator brings
th..
N$ 324.82
Ex VAT:N$ 282.45
Brand: TORK CRAFT
MPN: MY3015-2-SK09
Tork Craft Polisher Service Kit Housing (35) For MY3015-2
At a Glance; Genuine replacement housing section for MY3015-2 polisher
The Tork Craft Polisher Service Kit Housing (35) For MY3015-2 is a genuine replacement motor housing section for the
MY3015-2 burnishing machine. Hard knocks, drops or years of service can leave the original casing cracked, worn or
difficult to assemble. This service kit supplies the correct housing component so you can restore the tool’s
str..
N$ 215.97
Ex VAT:N$ 187.80
Brand: TORK CRAFT
MPN: MY3015-2-SK10
Tork Craft Polisher Service Kit Carb. Brush Pair (36) For MY3015-2
At a Glance; Genuine carbon brush pair for MY3015-2 polisher
The Tork Craft Polisher Service Kit Carb. Brush Pair (36) For MY3015-2 is a genuine set of replacement carbon
brushes for the MY3015-2 polisher or burnishing machine. Carbon brushes are wear parts that gradually shorten with
use. Once they are too short, you may notice excessive sparking, loss of power or intermittent running. Swapping in
a fr..
N$ 100.34
Ex VAT:N$ 87.25
Brand: TORK CRAFT
MPN: MY3015-2-SK11
Tork Craft Polisher Service Kit Brush Holder And Cover Comp. (37–39) For MY3015-2
At a Glance; Genuine brush holder and cover set for MY3015-2 polisher
The Tork Craft Polisher Service Kit Brush Holder And Cover Comp. (37–39) For MY3015-2 is a genuine spare set for
the brush area of your polisher or burnishing machine. Worn, heat-damaged or cracked brush holders and covers can
cause poor contact, excessive sparking and unreliable starting. This MY3015-2-SK11 kit replaces the..
N$ 56.41
Ex VAT:N$ 49.05
Brand: TORK CRAFT
MPN: MY3015-2-SK12
Tork Craft Polisher Service Kit Speed Control (41) For MY3015-2
At a Glance; Genuine variable speed control module for MY3015-2 polisher
The Tork Craft Polisher Service Kit Speed Control (41) For MY3015-2 is a genuine replacement speed control unit for
your MY3015-2 polisher or burnishing machine. If your tool no longer holds a steady speed, surges under load or
refuses to adjust properly, the speed control module is often the culprit. Swapping it out with the correct
..
N$ 862.44
Ex VAT:N$ 749.95
Brand: TORK CRAFT
MPN: MY3015-2-SK13
Tork Craft Polisher Service Kit Switch And Trigger (42) For MY3015-2
At a Glance; Genuine on/off switch and trigger assembly for MY3015-2 polisher
The Tork Craft Polisher Service Kit Switch And Trigger (42) For MY3015-2 is a genuine replacement control assembly
for your burnishing machine. Over time, switches and triggers can wear, stick or fail completely, leaving your
machine difficult or unsafe to use. This MY3015-2-SK13 kit replaces the original switch and trigger compo..
N$ 108.10
Ex VAT:N$ 94.00
Brand: TORK CRAFT
MPN: MY3015-2-SK14
Tork Craft Polisher Service Kit Handle (40/45/48/49) For MY3015-2
At a Glance; Genuine rear handle component set for MY3015-2 polisher
The Tork Craft Polisher Service Kit Handle (40/45/48/49) For MY3015-2 is a genuine replacement handle kit for your
burnishing machine. Daily use, drops and general wear can leave the rear handle cracked, loose or uncomfortable to
hold. This MY3015-2-SK14 kit groups the key handle components so you can rebuild the main grip area, restoring
..
N$ 218.10
Ex VAT:N$ 189.65
Brand: TORK CRAFT
MPN: MY3015-2-SK15
Tork Craft Polisher Service Kit Protective Cov. (51/53/54) For MY3015-2
At a Glance; Genuine protective cover and guard components for MY3015-2
The Tork Craft Polisher Service Kit Protective Cov. (51/53/54) For MY3015-2 is a genuine guard and cover kit for
your stainless burnishing machine. Day-to-day use can leave protective covers cracked, bent or missing, which not
only looks untidy but can also expose the user and machine to unnecessary risk. This MY3015-2-SK15 kit repl..
N$ 66.13
Ex VAT:N$ 57.50